|
CSLB # 703567 Serving You with the Highest Quality Workmanship Since 1955 |
.
|
|
|
|
Why choose a Single-Ply Cool Roof Restoration System from ERSystems? • ERSystems manufactures several different technologies to ensure the correctproduct is used for each situation. • Materials are easily applied; restoration costs may be as low as 20 percent oftotal tear-off and replacement costs. • Makes the inconvenience, risk and environmental implications of roof tear-offunnecessary. • Restoration may be expensed, while roof replacement must be capitalized.• ERSystems coatings are adaptable to nearly every type of Single-Ply membrane.• Reduces future maintenance costs with fast and economical repairs.• Life expectancy of the roof more than doubles.• ERSystems is the first manufacturer to warrant Single-Ply Restoration installations.The History of Single-Ply Membranes Single-Ply membranes have been a proven roof system for the past 20 years. Inadequacies in early membranes have since been re-engineered, refined and improved. Sun, weather and temperature extremes have caused adhesion failure, flashing deterioration, shrinking and chalking in many EPDM and CSPE (Hypalon ™) systems.Thermoplastic membranes (PVC and CPE) have exhibited plasticizer migration and UV instability that results in shrinking, embrittlement, chalking and crazing. As these systems age, the probability of leaks, maintenance costs and even total roof replacement increases. ERSystems Single-Ply Restoration Systems slows the aging process and dramatically reduce the effects associated with aging. The Single-Ply Cool Roof Restoration System Restore Clean and prime the existing single-plymembrane to remove chalk, dirt, and debris, promoting a strong bond to the existing membrane. Protect & Preserve Repair seams, flashings, cracksand tears. Then, rework shrinking membranes, interrupt the chalking process, stop immediate leaks, restore membrane integrity, reduce plasticizer migration, and halt premature deterioration. Cool Coat to protect against sun, water, weatherand high temperatures. Longer roof life means a higher ROI on the roof and less debris in landfills. Take action to preserve your membrane before your only alternative is a complete tear-off. ERSystems Protective Coatings Will Extend the Life of a Single-Ply Roof Elastomeric Coatings The coatings stretch and move asthe membrane moves to provide continuous protection. Restored Performance Provides service life equivalentto, or exceeding, that of the original membrane. Reflective ERSystems white coatings reflect over 80percent of the heat and damaging rays of the sun. This lowers the membrane temperature, slows membrane degradation, improves urban air quality and can lead to substantial energy savings. Flexible The coatings stay flexible in temperatureextremes from –50º F to 200º F. Weatherproof The coatings are tested and proven UVand weather resistant. They are seamless and fully adhered, and may add up to 50 percent of the original single-ply membrane thickness. Durable and Chemical Resistant Approximately 20 milsof coating adds protection against traffic, airborne chemical contaminants and rooftop emissions.3 Why Choose a Metal Cool Roof Restoration System from ERSystems? • Because no fabric is used on the vertical and horizontal seams; issues such astrapped moisture, air pockets and excessive installation labor are no longer a concern. • Restoration costs may be as low as 20 percent of total tear-off and replacementcosts; materials are easily applied. • Makes the inconvenience, risk and environmental implications of roof tear-offunnecessary. • Restoration may be expensed, while roof replacement must be capitalized.• ERSystems Metal Roof Restoration System has over 30 years of provenperformance and is tested and approved by UL and FM Global. • Repairs are fast and economical.• Reduces future maintenance costs.• 80 mils of protection over problem seams, fasteners and around penetrations.The Metal Cool Roof Restoration System Restore Inhibit further metal deteriorationby rust-proofing. Stop rust even in the most severe conditions. Protect & Preserve HER 2000 seals seams,fasteners and penetrations. HER 2000 works without the use of fabric reinforcement. HER 2000 has the capacity to adhere, stretch and flex as the building moves and yet remains extremely tough. Cool ERSystems highly reflective finishcoats reduce the thermal shock experienced by metal during extreme temperature fluctuations, minimizing expansion and contraction of the roof and helping to reduce cooling costs.
|
